TCP/IP Four Doors Access Control Panel 30000 Card Capacity With Wiegand ZK Access Control Board C3 400 Access Control System

TCP/IP Four Doors Access Control Panel 30000 Card Capacity With Wiegand ZK Access Control Board C3 400 Access Control System
  • Продавецtampabaybuccaneersvsminnesotavikings.us
  • Список ценUS $90.00piece
  • Продажная ценаUS $90.00piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,2 (942)

Oписание продукта

High Quality Traffic Control Single Inductive loop detector for Traffic vehicle RFID System access control automatic gates 

 

The M1H is a single channel inductive loop detectors. The principle is based on a change in the inductance within the loop which is caused by the metallic components of passing vehicles. The changes are picked up and evaluated by a microprocessor. Ease of use thanks to automatic calibration when the operating voltage is applied.

   

M1H Loop Vehicle detector Technical Data :

1) Power Supply :  AC/DC  12~24V  .please tell us which one do you want .

2) Power Consumption : 3W maximum

3) Output Relay : 120V/3A AC

4) Work Temperature : -20oC ~ +70oC

5) Loop Inductance Range : 50μH ~ 800μH ( ideal 100μH ~ 300μH )

6) Work Frequency : 20kHz ~ 130kHz

7) Sensitivity : 4 levels adjustable

8) Self-calibrating : 1s to 2s

9) Dimension : 79×22.5×90mm ( L×W×H )
 

M1H Loop Vehicle detector main feactuers :

 

1) Reset Switch : The reset switch enables the detector to be manually reset during 

    commissioning and testing . This results in the detector re-tuning the sensing loop and

    becoming ready for vehicle detection ;

2) Selectable Pulse Time : This feature sets the length of time that the pulse relay will be

    energized for 1 Second or 0.5 Seconds ;

3) Pulse Relay Selection : The Pulse Relay may be configured to energize on detection of a

    vehicle or when the vehicle leaves the loop ;

4) Sensitivity Boost : This feature sets the undetect level to maximum sensitivity and is used  

    to prevent loss of detection of high-bed vehicles ;

5) Switch Selectable Sensibility : 4 sensitivity setting are available on the switches to allow

    flexibility in configuration ;

6) Switch Selectable Frequency : 4 frequency settings are available to prevent cross-talk

    between adjacent loops ;

7) Filter Option : This option is used to provide a delay between detection of the vehicle and

    switchiing of the output relay . This relay is normally used to prevent false detection of

    small or fast moving objects ;

8) Permanent Presence Option : This feature ensure detection of the vehicle will be maintained

    when the vehicle is parked over the loop for extended periods .

single channel inductive loop detectors (1)single channel inductive loop detectors (5)single channel inductive loop detectors (2)single channel inductive loop detectors (3)111