2000W Battery Discharge Power Mode/MPPT Solar Grid Tie Inverter with Limiter Sensor DC 45 90V AC 220V 230V 240V PV connected

2000W Battery Discharge Power Mode/MPPT Solar Grid Tie Inverter with Limiter Sensor DC 45 90V AC 220V 230V 240V PV connected
  • Продавецtampabaybuccaneersvsminnesotavikings.us
  • Список ценUS $385.56piece
  • Продажная ценаUS $385.56piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,6 (968)

Oписание продукта

 

6 years Store on Aliexpress . For new energy products , we are more professional .   

fengefengefenge

 

2000w Solar Power Grid Tie Inverter 

  --with Limiter / Sensor  ,  Battery Discharge function

  --DC  45V-90V (optional )

  --AC 220V 230V 240V  (auto selected ) 

  -- for USA 240VAC connection  , please see photo below. 

NEWGTIL

Why we produced the GRID TIE INVERTER WITH LIMITER ?

It is in response to the overwhelming clamor from our customers for a product that can control the amount of power that the grid tie inverters (GTI) can generate so that the amount of excess power produced by the solar panels are  reduced to insignificant levels, if not eliminated --- because in some countries,the producer pays for the excess power it gives to the distribution grid. This is because the electric power meters (the one provided by the electricity provider in the area) are not aware of the direction of power flow. In other words it only adds even if  power is exported to the grid, thus, the consumers will be charged for power even if it is given to the grid, and this is the problem

This is the 2nd generation grid tie inverter with limiter.

With the 2nd generation GTIL,we integrated the limit function inside the GTI-We call this internal limiter.In this way,No additional limiter module is needed,reduced customer’s cost,more easier for installation.But in case customer install inverter far away from the main circuit breaker,we also enable the 2nd GTIL work with stand-alone limiter,we call this-external limiter.For sure,the inverter can work under normal Grid tie-no limit mode,just set on the nice LCD and save your setting. 

New upgraded firmware enable battery or solar limiter current and power model.

User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter . 

User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged .

Technical Data

Continuous Power Output

1950W

Peak Power Output

2000W

Input DC Voltage Range

 45V ~ 90V

Peak power tracking voltage

 50V-90V

AC Output Voltage Range

190VAC ~ 260VAC

Output Frequency

46Hz~65Hz

Standby Power Consumption

<0.5W

Total Harmonic Distortion

<5%

Peak Inverter Efficiency

92%

MPPT Efficiency

99%

Power Factor

0.99

Output Wave Form

Pure Sine Wave

MPPT Function

Yes

Over Current Protection

Yes

Over Temperature Protection

Yes

Reverse Polarity Protection

Yes

Anti-Island Protection

Yes

Stackable

Yes

Weight ( Kg)

6kg

Dimensions (W x H x D)

434x196x88 mm

 

tushi

Description:

a: DC input , for solar panels connection

b:  Connector for external limiter

c: Connector for internal limiter

d: AC output , use AC cable to connect to home grid

Sensor Clamp :

 

Packing List :

 

packing

1. Solar Grid Inverter with Limiter(built-in)-----1unit                     

2. AC cable-------------1 pcs

3. Internal type Limiter clamp with sensor & 2m cable----1pcs                   

4. Warranty card----1pcs

5. User Manual ----1pcs

 --for USA 240VAC connection  , please see photo below. 

The output connection needs to be custom order , connect the L/N  to US 240VAC , L and L (any two L wire ) .

230vac us 3

fengefengefenge

gold

Gold Quality. Gold Commitment . Gold Service.

fengefengefenge

How to use the Inverter ?

1.  Standard Grid Tie Inverter Model

1

one unit inverter

2

more than 1 unit inverters stackable

1.1. The Grid Tie inverter converts DC power produced by Solar Panels to AC, connects to the grid and feed all of the power available from the panels to the AC load.

1.2. All excess power that is not needed by the load is then exported to the Grid.

1.3. If the Grid fails, then the Grid Tie Inverter will turn off.  When the Grid comes back on line. The Grid Tie Inverter will again supply power to the load and any excess power is exported to the Grid again.

1.4. If the Solar Panel is producing less power and the GTI cannot deliver all the power needed by the load, then power will be supplemented by the Grid.

1.5. Power Meters (Except smart meter) are not aware of the direction of Power flow. The user then pays for the power exported and delivered by the Grid.

45

2. Using Grid Tie Inverter With Limiter Model

2.1 The Grid Tie Inverter with Limiter delivers only the power needed by the load and prevents delivering excess power hence avoids excess power in going back to the Grid.

2.2 The heart of the Grid Tie Inverter with Limiter is the Limiter Module (LM). The LM continuously sampled the power needed by the load through the current sensor connected after the Main Circuit Breaker. The LM then will process the signal. It then sends signal to Grid Tie Inverter how much power to deliver to the load in real time.

2.3 The user, after installing and connecting the GTIL correctly, need not do anything and the unit will do its work automatically.

3. Installation of GTIL With Internal Limiter

7

3.1 This installation is not require an additional limiter module,Installation is much easier.Clamp the current sensor cable to the hot wire to measure the current,the internal limiter will auto detect the load power and control the inverter output power,excess power will be well controlled.

3.2 External protective device including dc and ac SPD(Surge protection device),dc and ac breaker,etc is recommended to installed in the system.

4.Limiter Setting on the LCD of the inverter:

The GTIL include three working mode:Work as normal GTI without power limitation.Work under Internal limiter mode and Work under External limiter mode,Pls make your setting on the LCD and save it,details setting operation,pls read the GTI manual. 

solar setting page lcd_Fotor2

5 Battery Discharge Power Mode

New upgraded firmware enable battery or solar limiter current and power model.

User can set the maximum output power of inverter , this can make the inverter work at cooler contition as user want and extend the lifespan of the inverter . 

User can set kick in/off voltage of the inverter which can flexible using with battery bank depend on users mind and can prevent battery bank from over discharged .

6 Limiter Module Specification

1. Clamp sensor- Max 100A

2. Wattmeter- Max 9999w

3. Terminal Block-Max 20A

4. Receptacle- max 2000w

5. Clamp sensor signal- 5v AC max mA

6. DC signal Cable- 5v DC, max mA

fengefengefenge

If the distance of meter and inverter is too long , you will need the External Limiter . 

*Note: The external limiter is not included in package .

If you need the external limiter , please order from this link:

3M CABLE External Limiter  3M CABLE External Limiter

 

 

fengefengefenge

NEW CE EN50438 Certification

new CE and EN50438_Fotor123

 

shipping

return refund

Return & Refund

30Days Return & Refund . 

 

Unhappy with the Product --- Return ;  Unhappy with the Service --- Return ; Unhappy with the Seller --- Return ;  No Reason --- Return . 

Warranty 

2 years Warranty for replacement or repair , life time parts support and technical support . 

1. GAIA NEW ENERGY is your trusted partner for long term business.We arethe MANUFACUTER of the solar inverter. We are responsible forthe quality of the inverter. The inverter has 2 years guarantee. We provide technical support and service for the inverter the whole life. All inverters would be double tested before shipment to be guaranteed in brand new condition and work perfectly.

2. Returns for exchange are permitted and must be initiated by the buyer within 30 days of receipt. All return items must be in their original condition. Return shipping and handling charge will be at the buyer\'s expense first. Please do contact with us for return address, details and any other issues.

3. We will not be responsible for any delay during delivery including but not limited to the customs package checking, strike, force majeure, etc.

4. We can declare lower value on the invoice for the duties reason, which does not reflect the total price you paid or the market value of the product. It may not apply to countries with different tariff rules. We are not responsible for any custom duty or import tax.

5. In case there is problem with your order, make sure CONTACT US before leaving negative feedback. 

6. Please leave us message if you have any question, we will reply in 24 hours, thank you!

fengefengefenge

More Products Suggested:

1000gtil2_Fotor 400 2000gtil2_Fotor 400 external limiter 400 AD 1000G-LCD AD 2000G-LCD wifi ad 400 1000G2 WAL TIL AD 2000G2 WAL TIL AD pv18 5k 300 pv18-4k 300 15k 3phase 300 10k 3 phase 300